Subject: RE: 3590 density in Dynam
From: Eric Schadow (eschadow@davisvision.com)
Date: Wed Jun 25 2008 - 13:51:56 EDT
Victor Check the Dynam Levels with CA? on the console. Are the systems the same level of Dynam? Eric -----Original Message----- From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU]On Behalf Of Victor Echavarry Diaz Sent: Wednesday, June 25, 2008 1:35 PM To: VSE Discussion List Subject: 3590 density in Dynam I'm trying to initialize a cartridge at a 3590 unit. But the only density it accepts is 08M. This machine has VSE/ESA 2.7 and Dynam 7. At other I initialize using the same cartridge and unit but it accept 08mh instead 08m this is first vse 2.6.2 and now has z/vse 3.1.2 and Dynam 7. The ipl from both systems is the same definition for 3590. ADD 480:481,TPA,08 3590 CARTRIDGE UNIT Thanks, Víctor Echavarry System Programmer Technology Systems & Operations Division EVERTEC _____ CONFIDENTIALITY NOTE: This email communication and its attachments contain information that are proprietary and confidential to EVERTEC, INC., its affiliates or its clients. They may not be disclosed, distributed, used, copied or modified in any way without EVERTEC, Inc.'s authorization. If you are not the intended recipient of this email, you are not an authorized person. Please delete it and notify the sender immediately. EVERTEC, Inc. and its affiliates do not assume any liability for damages resulting from emails that have been sent or altered without their consent. Moreover, EVERTEC, Inc. has taken precautions to safeguard its email communications, but cannot assure that such is the case and disclaim any responsibility attributable thereto. ------------------------------------------------------------------------ The information contained in this communication is intended only for the use of the recipient(s) named above. It may contain information that is privileged or confidential, and may be protected by State and/or Federal Regulations. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ------------------------------------------------------------------------
This archive was generated by hypermail 2b25 : Mon Jun 30 2008 - 23:50:13 EDT