AW: ICKDSF problem

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: AW: ICKDSF problem
From: Schoenemann, Holger (Holger.Schoenemann@peterhahn.de)
Date: Thu Jul 31 2008 - 09:04:55 EDT 

I never had problems with:

INIT SYSNAME(SYS010) NOVFY VOLID(HAHA21) VSEVTOC(0,1,14) PURGE

I have no VALIDATE DATA 




Peter Hahn GmbH · Sitz: 73649 Winterbach · Peter-Hahn-Platz 1  
Geschäftsführer: Roland Allgeyer, Marina Fuchs-Halbgewachs
 

Registergericht: Stuttgart · Handelsregister-Nr.: HR B 280228 · UST.-IdNr. DE 811132800 · Steuer-Nr. 218/117/40036
Bankverbindung:Commerzbank Schorndorf · BLZ 600 400 71 · Konto-Nr.  2 800 639                                                                  
 

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

-----Ursprüngliche Nachricht-----
Von: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] Im Auftrag von turner, mark
Gesendet: Donnerstag, 31. Juli 2008 14:34
An: VSE Discussion List
Betreff: ICKDSF problem

Good morning listers.

I'm encountering problems when I attempt to reinitialize one of my 3390
mod 3 volumes.  Here is the output from the init job:

ICKDSF - VSE        DEVICE SUPPORT FACILITIES 17.0                TIME:
08:27:3
 

   INIT SYSNAME(SYS010) NOVERIFY VOLID(BADVOL) PURGE -

        VSEVTOC(0,01,15) VALIDATE DATA

ICK00700I DEVICE INFORMATION FOR 0A4E IS CURRENTLY AS FOLLOWS:

          PHYSICAL DEVICE = 3390

          STORAGE CONTROLLER = 3990

          STORAGE CONTROL DESCRIPTOR = E9

          DEVICE DESCRIPTOR = 0A

          ADDITIONAL DEVICE INFORMATION = 08001500

          TRKS/CYL = 15, # PRIMARY CYLS = 3339

ICK31777I UNRECOVERABLE I/O ERROR READING THE VTOC

ICK30003I FUNCTION TERMINATED. CONDITION CODE IS 12

          08:27:32    07/31/08

 

ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 12


The analyze runs file with no errors.

ICKDSF - VSE        DEVICE SUPPORT FACILITIES 17.0                
                                                                  
 ANALYZE SYSNAME(SYS010) SCAN SPEED                               
ICK00700I DEVICE INFORMATION FOR 0A4E IS CURRENTLY AS FOLLOWS:    
          PHYSICAL DEVICE = 3390                                  
          STORAGE CONTROLLER = 3990                               
          STORAGE CONTROL DESCRIPTOR = E9                         
          DEVICE DESCRIPTOR = 0A                                  
          ADDITIONAL DEVICE INFORMATION = 08001500                
          TRKS/CYL = 15, # PRIMARY CYLS = 3339                    
ICK01400I 0A4E ANALYZE STARTED                                    
ICK01409I DRIVE TEST STARTED                                      
ICK01407I 0A4E NO DRIVE PROBLEMS FOUND                            
ICK01408I 0A4E DATA VERIFICATION TEST STARTED                     
ICK01405I 0A4E ALL DATA 'MACHINE READABLE' WITHOUT ERRORS         
ICK01406I 0A4E ANALYZE ENDED                                      
ICK00001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0        
          08:20:46    07/31/08                                    
ICKDSF - VSE        DEVICE SUPPORT FACILITIES 17.0                
ICK00002I ICKDSF PROCESSING COMPLETE. MAXIMUM CONDITION CODE WAS 0

Does anyone have a suggestion on how I can initialize this volume?  Here
is my initialize job.

* $$ JOB JNM=INITA4E,CLASS=P,DISP=D                      
* $$ LST CLASS=C                                         
// JOB INITA4E - A4E DISK PACK - VOL METRES              
// ASSGN SYS010,A4E                                      
// EXEC ICKDSF,SIZE=AUTO                                 
   INIT SYSNAME(SYS010) NOVERIFY VOLID(BADVOL) PURGE -   
        VSEVTOC(0,01,15) VALIDATE DATA                   
/*                                                       
/&                                                       
* $$ EOJ                                                 

Mark E. Turner
Systems Programmer
Harford County Government
45 S. Main St.
Bel Air, MD  21014

Work: (410) 638-4109 ext. 1229
Cell: (443) 243-3591

mailto:meturner@harfordcountymd.gov

http://www.harfordcountymd.gov

New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Thu Jul 31 2008 - 23:50:13 EDT