RE: IPL error

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: RE: IPL error
From: Dan Gofton (dgofton@saginawcounty.com)
Date: Wed Aug 20 2008 - 08:57:42 EDT 

Perfect! 

Thank you Billy.

Dan Gofton
Technical Services Administrator/Manager
County of Saginaw, MI
989 790 5525 

> -----Original Message-----
> From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] 
> On Behalf Of Billy R. Bingham
> Sent: Wednesday, August 20, 2008 8:44 AM
> To: VSE Discussion List
> Subject: Re: IPL error
> 
> IPL with the following Load Parm:
> 
> LOADP ..P
> 
> And when the IPL stops enter:
> 
> STOP=ADD
> 
> and then enter the ADD statement for the DLF volume.
> 
> 
> Billy
> ---- Dan Gofton <dgofton@saginawcounty.com> wrote: 
> > Good morning.
> > 
> > I screwed up my IPLPROC on my systems LPAR.  I added a DLF 
> statement 
> > for the lock file but failed to add the ADD for the drive 
> it is on.  
> > Obviously, the IPL then throws up.
> > 
> > Is there an easy way to get around this.  I'm hoping either 
> by setting 
> > a loadparm and executing the IPL one statement at a time and being 
> > able to add the ADD statement, or by not executing the DLF 
> statement.
> > 
> > Or, am I going to have to restore from my FCOPY backup?
> > 
> > Thanks.
> > 
> > Dan Gofton
> > Technical Services Administrator/Manager County of Saginaw, MI
> > 989 790 5525
> > 
> > 
> 
> 
>

New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Sat Aug 30 2008 - 00:20:13 EDT