Subject: RE: IPL from TAPE of VSE utiltiy tape
From: Frank M. Ramaekers (FRamaekers@ailife.com)
Date: Tue Jun 17 2008 - 16:09:54 EDT
Yeah, it takes me 5 times (non-VM of course). Once each for HDR1, HDR2,
VOL1 and TM.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr. Fax: (254)741-5777
Waco, Texas 76710
-----Original Message-----
From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf
Of Tom Duerbusch
Sent: Tuesday, June 17, 2008 2:46 PM
To: VSE Discussion List
Subject: Re: IPL from TAPE of VSE utiltiy tape
Try IPLing the drive 5-10 times. At a disaster recovery site, the
standard VSE Standalone recovery tape (with standard labels), takes 5
IPLs to get to the standalone utilities (produced under z/VSE 3.1).
Tom Duerbusch
THD Consulting
>>> "Edward M. Martin" <EMartin@aultman.com> 6/17/2008 1:46 PM >>>
Hello Everyone,
I am trying to ipl from 582 tape drive using a VSE/ESA
Standalone Utility tape.
Everything starts to work and bam.
HCPGIR450W CP entered; disabled wait PSW 000A0000 00001122
I have attached the tape to my z/VM user id.
Any thing I should look for?
Terminal Conmode 3270 3270 mode
Def 009 01f just to make sure
Ipl 582 clear
Wait and hit enter.
Console appears, then after about 3-5 seconds.
HCPGIR450W CP entered; disabled wait PSW 000A0000 00001122
HCP1122E command was not performed. Tape vdev has been
given to user userid.
Explanation: The command could not be performed because
you are no longer the
owner of the real device associated with the virtual
device specified as vdev.
This occurs when you have issued the GIVE command with
the RETURN option for
this device. command may be either IPL, REWIND, or
RESET.
System Action: The command is not performed, and system
operation continues.
User Response: You will not be able to issue this
command to this virtual
device until the current owner of the device detaches
it.
Ed Martin
330-588-4723
ext 40441
_____________________________________________________
This message contains information which is privileged and confidential and is solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any review, disclosure,
copying, distribution, or use of the contents of this message is strictly prohibited. If you have
received this in error, please destroy it immediately and notify us at PrivacyAct@ailife.com.
This archive was generated by hypermail 2b25 : Mon Jun 30 2008 - 23:50:12 EDT