Subject: RE: IPL from TAPE of VSE utiltiy tape
From: Edward M. Martin (EMartin@aultman.com)
Date: Tue Jun 17 2008 - 15:00:49 EDT
Hello Billy, Bob, and Mark, I am trying a VSE/ESA 2.6.1 tape that used to work. And it does work for a few seconds then fails. I will try a re-creating the tape. Ed Martin 330-588-4723 ext 40441 -----Original Message----- From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of Billy R. Bingham Sent: Tuesday, June 17, 2008 2:50 PM To: VSE Discussion List Subject: Re: IPL from TAPE of VSE utiltiy tape What version of the VSE SA Utility are you trying to IPL? Billy ---- "Edward M. Martin" <EMartin@aultman.com> wrote: > Hello Everyone, > > I am trying to ipl from 582 tape drive using a VSE/ESA > Standalone Utility tape. > > Everything starts to work and bam. > > HCPGIR450W CP entered; disabled wait PSW 000A0000 00001122 > > I have attached the tape to my z/VM user id. > > Any thing I should look for? > > Terminal Conmode 3270 3270 mode > Def 009 01f just to make sure > Ipl 582 clear > > Wait and hit enter. > > Console appears, then after about 3-5 seconds. > > > HCPGIR450W CP entered; disabled wait PSW 000A0000 00001122 > > > HCP1122E command was not performed. Tape vdev has been > given to user userid. > > > Explanation: The command could not be performed because > you are no longer the > owner of the real device associated with the virtual > device specified as vdev. > This occurs when you have issued the GIVE command with > the RETURN option for > this device. command may be either IPL, REWIND, or > RESET. > > > System Action: The command is not performed, and system > operation continues. > > > User Response: You will not be able to issue this > command to this virtual > device until the current owner of the device detaches > it. > > > > Ed Martin > 330-588-4723 > ext 40441 >
This archive was generated by hypermail 2b25 : Mon Jun 30 2008 - 23:50:12 EDT