Re: XDEST puzzler

New Message	Reply	Date view	Thread view	Subject view	Author view	Other groups

Subject: Re: XDEST puzzler
From: Jeffrey Barnard (bsiopti@bsiopti.com)
Date: Thu Jul 24 2008 - 09:56:17 EDT

Next message: Billy R. Bingham: "Re: XDEST puzzler"
Previous message: industrynews@winwholesale.com: "Re: SDUMPX return/reason codes"
In reply to: Frank M. Ramaekers: "XDEST puzzler"
Next in thread: Billy R. Bingham: "Re: XDEST puzzler"
Reply: Jeffrey Barnard: "Re: XDEST puzzler"

Frank,

I used this JECL ...
* $$ JOB JNM=PRINTLOG,CLASS=P,XDEST=BSIVSE31

Then used this JECL ...
* $$ JOB JNM=PRINTLOG,CLASS=P XDEST=BSIVSE31

Both jobs were sent to BSIVSE26 system's POWER RDR (00C) under VM. The
first job was routed to BSIVSE31 to execute. The seconds ran on the
BSIVSE26 system.

The question is why is the job still being routed to a remote system when
the comma was removed in the JECL?

Regards,
Jeff

-- 
Jeffrey C Barnard
Barnard Software, Inc. http://www.bsiopti.com
BSI 407-323-4773 Support 407-688-7123

Next message: Billy R. Bingham: "Re: XDEST puzzler"
Previous message: industrynews@winwholesale.com: "Re: SDUMPX return/reason codes"
In reply to: Frank M. Ramaekers: "XDEST puzzler"
Next in thread: Billy R. Bingham: "Re: XDEST puzzler"
Reply: Jeffrey Barnard: "Re: XDEST puzzler"

New Message	Reply	Date view	Thread view	Subject view	Author view	Other groups

This archive was generated by hypermail 2b25 : Sun Jul 27 2008 - 05:20:11 EDT