Re: DB2 7.5 CLNTINS= parameter?

New Message	Reply	Date view	Thread view	Subject view	Author view	Other groups

Subject: Re: DB2 7.5 CLNTINS= parameter?
From: Roland P. Chung (roland.chung@rogers.com)
Date: Thu May 29 2008 - 14:26:09 EDT

Next message: Frank Swarbrick: "Re: DB2/VSE ARIGMSG"
Previous message: industrynews@winwholesale.com: "RE: CICS Web Services and SOAP"
Maybe in reply to: Terry McWilliams: "DB2 7.5 CLNTINS= parameter?"
Maybe reply: Roland P. Chung: "Re: DB2 7.5 CLNTINS= parameter?"

Hello Terry, in V7.50, variable CLNTINS has been add in most of the installation PROCs and by default it has been set to N in the PROCs.  This will be set to Y in ARISIMGC which is the CLIENT EDITION's job manager.
I hope this helps.
...Roland

----- Original Message ----
From: Terry McWilliams <tmcwilliams@gomedico.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wednesday, May 21, 2008 5:15:58 PM
Subject: DB2 7.5 CLNTINS= parameter?

Hi All,

    We are migrating our DB2 7.3 z/VSE 4.1.1 to DB2 7.5 and do not
know what to put in the CLNTINS= parameter. What is the CLNTINS= for?

Thanks in advance.

Terry McWilliams
Technical Support

Next message: Frank Swarbrick: "Re: DB2/VSE ARIGMSG"
Previous message: industrynews@winwholesale.com: "RE: CICS Web Services and SOAP"
Maybe in reply to: Terry McWilliams: "DB2 7.5 CLNTINS= parameter?"
Maybe reply: Roland P. Chung: "Re: DB2 7.5 CLNTINS= parameter?"

New Message	Reply	Date view	Thread view	Subject view	Author view	Other groups

This archive was generated by hypermail 2b25 : Mon Jun 30 2008 - 23:50:10 EDT