Subject: Re: 3390-9 device
From: ronald alagar (rfalagar@yahoo.com)
Date: Mon Aug 04 2008 - 11:24:04 EDT
Hi Martin,
haven't notice i'll get back to you on this.
thanks,
ronald
----- Original Message ----
From: Edward M. Martin <EMartin@aultman.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Monday, August 4, 2008 10:39:47 PM
Subject: RE: 3390-9 device
Hello Ronald,
What does the VSE VOLUME command show?
Ed Martin
330-588-4723
ext 40441
-----Original Message-----
From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of ronald alagar
Sent: Sunday, August 03, 2008 11:34 PM
To: VSE Discussion List
Subject: Re: 3390-9 device
Hi Mike,
CA utility was able to display the correction cylinders of the 3390-9 device, but if we use a VTOC display of VSE, it displays a 3390-3 cylinder. A PTF would probably solve this.
Thanks,
ronald
----- Original Message ----
From: Rich Smrcina <rsmrcina@wi.rr.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Saturday, August 2, 2008 10:54:05 PM
Subject: Re: 3390-9 device
Then that begs the question, what release of VSE? Sufficiently current
releases should be able to do this by now (I would think). :)
Mike Rice wrote:
> If I remember correctly, there were some PTFs I had to put on for 3390-9
> support back when I installed my 3390-9s. Have you checked for those?
>
> Mike
>
> >>> Rich Smrcina <rsmrcina@wi.rr.com> 08/02/2008 10:26 AM >>>
> How did you initialize it? Send the jobstream.
>
> ronald alagar wrote:
> > We added a new device 3390-9, but when we initialize the volume. We
> still got 3390 cyls on VTOC display.
> > What are the parameters needed to define a 3390-9 device in IOCDS and
> ASIPROC.
> > Thanks,
> > ronald
> >
> >
> >
> >
>
> --
> Rich Smrcina
> VM Assist, Inc.
> Phone: 414-491-6001
> Ans Service: 360-715-2467
> rich.smrcina at vmassist.com
> http://www.linkedin.com/in/richsmrcina
>
> Catch the WAVV! http://www.wavv.org <http://www.wavv.org/>
> WAVV 2009 - Orlando, FL - May 15-19, 2009
>
> This electronic message is intended for transmission to authorized
> persons only. It may contain information that is confidential,
> privileged, proprietary or subject to other confidentiality protections.
> It is not intended for transmission to, or receipt by, any unauthorized
> persons. If you are not authorized to receive this message, you may not
> review, copy, forward or otherwise distribute this message. If you have
> received this message in error, please notify the sender by reply e-mail
> and delete it from your system. Thank you.
--
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service: 360-715-2467
rich.smrcina at vmassist.com
http://www.linkedin.com/in/richsmrcina
Catch the WAVV! http://www.wavv.org
WAVV 2009 - Orlando, FL - May 15-19, 2009
This archive was generated by hypermail 2b25 : Fri Aug 29 2008 - 15:50:11 EDT