Subject: Re: Problem with work file
From: Mike Farmer (MikeFarmer@Bernhardt.com)
Date: Thu Jul 31 2008 - 16:02:18 EDT
Dave,
That did the trick. What does the // RESET ALL actually do.
Thanks
MF
Dave Lewis
<david_v_lewis@ea
rthlink.net> To
Sent by: "VSE Discussion List"
owner-vse-l@Lehig <vse-l@Lehigh.EDU>
h.EDU cc
Subject
07/31/2008 03:52 Re: Problem with work file
PM
Please respond to
vse-l@Lehigh.EDU
You might try a // RESET ALL before step 3.
-----Original Message-----
>From: Mike Farmer <MikeFarmer@Bernhardt.com>
>Sent: Jul 31, 2008 2:14 PM
>To: VSE Discussion List <vse-l@Lehigh.EDU>
>Subject: Problem with work file
>
>
>When running the following JCL I am getting this Natural error message
from
>step 3 when it tries to read in the work file created in step 1
>MFSYNCS2 0070 NAT1518 GET or PUT to not openedWORK FILE 1.
>If I put a * $$ JOB card between steps 2 and 3 it works but if I try to
run
>it as one job it fails with this error.
>... snip
This archive was generated by hypermail 2b25 : Thu Aug 07 2008 - 21:05:09 EDT