Subject: RE: UCB
From: McBride, Catherine (CMcbride@kable.com)
Date: Wed Jul 23 2008 - 05:21:06 EDT
There may be, unfortunately am working remotely and do not have access to documentation at the moment. You might try to Google VSE,PUB.. or wait a couple more hours until a few more people join the list. Martin was alluding to what addresses you could dump and follow the storage chains.
________________________________
From: owner-vse-l@Lehigh.EDU on behalf of ronald alagar
Sent: Wed 7/23/2008 3:54 AM
To: VSE Discussion List
Subject: Re: UCB
Hi Catherine,
If we don't have FAQS installed in our system, do we have other console commands to know the PUB in VSE?
thanks,
ronald
----- Original Message ----
From: "McBride, Catherine" <CMcbride@kable.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wednesday, July 23, 2008 4:40:45 PM
Subject: RE: UCB
Of course, if you have FAQS you can use DSPLY PUB online
________________________________
From: owner-vse-l@Lehigh.EDU on behalf of ronald alagar
Sent: Wed 7/23/2008 3:26 AM
To: VSE Discussion List
Subject: Re: UCB
Hi Martin,
Thanks for the help.
regards,
ronald
----- Original Message ----
From: Martin T2.. <Martin@pi-sysprog.de>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wednesday, July 23, 2008 3:59:43 PM
Subject: Re: UCB
Ronald,
>> ...can i get the PUB of a device on VSE? <<
That is a different animal-
old way:
low-core+14 points to comreg +40 points to pub (2byte adress) PUB is 8
bytes per entry with CUU in first two bytes. What do you want out of it?
new way:
EXTRACT ID=PUB,AREA=PUB,..... I don't have the details handy - they
are in supervisor DRM
--
Martin
--
XML2PDF - the way to get all features of PDF into your documents
on mainframe or PC systems; more at http://www.pi-sysprog.de <http://www.pi-sysprog.de/> <http://www.pi-sysprog.de/>
This archive was generated by hypermail 2b25 : Thu Aug 07 2008 - 21:05:08 EDT