Subject: RE: z/VSE 4.1.2
From: Kevin Corkery (kcorkery@comcast.net)
Date: Tue Jul 22 2008 - 10:39:40 EDT
Ed ... Logon to ShopZSeries. Then click on "create new software orders". Operating environment is "zVSE" and you wish to order "products" not "service". The next screen should ennumerate your know systems. Select the system you need the software for. You should then get a screen showing the known licensed products for the system, then select your products based on the packages. --- Kevin Corkery Independent Consultant Voorhees, New Jersey -------------- Original message ---------------------- From: "Edward M. Martin" <EMartin@aultman.com> > Hello Kevin, > > That would seem to be the best option. Can you direct me to > where or how you ordered the BASE/EXTEND tape? I can download and > create a tape here (I think that is what I have to do to FastService). > > I am at a perfect point to upgrade now. > > I can get any more PTF's via ShopzSeries as the ISRTOOL > indicates I have them all. But when I go to the Service doc for ptfs > for z/VSE 4.1.2 I see a bunch that I don't have on. > > It would seem to me that if the PRODID is the same for > 4.1.0/4.1.1/4.1.2 we should be able to get all the ptfs to upgrade 4.1 > to the most current level. > > Ok enough of the Soap Box about maintenance. > > Ed Martin > 330-588-4723 > ext 40441 > > -----Original Message----- > From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf > Of Kevin Corkery > Sent: Monday, July 21, 2008 8:21 PM > To: VSE Discussion List > Subject: RE: z/VSE 4.1.2 > > Ed ... > > I didn't actually use the software list (although I did use it after the > fact to check for applicable PTF) I just found a spot where the list of > products available was displayed and proceeded to order the zVSE base > tape > and the extended base tape ... I got 4.1.2 downloadable two days later. > > -----Original Message----- > From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf > Of > Edward M. Martin > Sent: Monday, July 21, 2008 4:20 PM > To: VSE Discussion List > Subject: RE: z/VSE 4.1.2 > > Hello Kevin, > > I used the IRSTOOL to send the History file to get all the known > PTF's. I have them downloaded, installed, and resend the history to get > any missing PTF's. The order was rejected as there were no known PTF's. > > I am ok with that. > > Is there a difference in the PRODID CF891C in z/VSE 4.1.0/ > 4.1.1/ 4.1.2? > > I am beginning to suspect that they are all the same now. > > Ed Martin > 330-588-4723 > ext 40441 > -----Original Message----- > From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf > Of Kevin Corkery > Sent: Monday, July 21, 2008 3:28 PM > To: VSE Discussion List > Subject: Re: z/VSE 4.1.2 > > It's not real clear but all you need to do is go on and order the base > products and the extended products and you'll get the 4.1.2 version, > i.e. the lastest service refresh. They figure it out on their own > without really telling you. > > -- > Kevin Corkery > Independent Consultant > Voorhees, New Jersey > > -------------- Original message ---------------------- > From: "Edward M. Martin" <EMartin@aultman.com> > > > > > > Hello Everyone, > > > > > > > > What are the key words and tricky phrases need to get z/VSE 4.1.2 > > Fast Service Upgrade via ShopzSeries? > > > > > > > > > > > > Ed Martin > > > > 330-588-4723 > > > > ext 40441 > > > > > > > > > >
This archive was generated by hypermail 2b25 : Thu Aug 28 2008 - 19:20:09 EDT