Subject: Re: FCOPY problem
August.Carideo@avon.com
Date: Fri Jul 11 2008 - 14:59:19 EDT
also, was back up done w/ std label
and you are trying restore w/o label ( unlabeled ) or vice versa
"Richard Barrow
\(Bigpond\)"
<barrow25@bigpond To
.net.au> "VSE Discussion List"
Sent by: <vse-l@Lehigh.EDU>
owner-vse-l@Lehig cc
h.EDU
Subject
Re: FCOPY problem
07/11/2008 01:35
PM
Please respond to
vse-l@Lehigh.EDU
Hmmm, could be. I don't use either FCOPY method, I was shooting from
memory.
Too bad FCOPY isn't as flexible as DDR.
----- Original Message -----
From: "David Stuart" <David.Stuart@ventura.org>
To: "VSE Discussion List" <vse-l@Lehigh.EDU>
Sent: Saturday, July 12, 2008 3:28 AM
Subject: Re: FCOPY problem
> Richard,
>
> The // Setpfix will get rid of the 8X12I message, but that's not an error
> and doesn't cause a RC=0016.
>
> More likely, it's that he's trying to restore a single file from an Fcopy
> Dump All tape. I don't believe you can do that. To restore a single
> file, I believe it would have to be a Fcopy Dump Volume.
>
> Dave
>
> Dave Stuart
> Prin. Info. Systems Support Analyst
> County of Ventura, CA
> 805-662-6731
> David.Stuart@ventura.org
>
>>>> "Richard Barrow (Bigpond)" <barrow25@bigpond.net.au> 7/11/2008 10:19
AM
>>>> >>>
> Ron,
>
> I'd suggest page-fixing some additional storage for the job. Try //
> SETPFIX
> LIMIT=1024K before // EXEC FCOPY.
>
> Regards, Richard Barrow
>
>
> ----- Original Message -----
> From: "Ron Ashley" <rashley@hsvutil.org>
> To: "VSE Discussion List" <vse-l@Lehigh.EDU>
> Sent: Saturday, July 12, 2008 3:08 AM
> Subject: RE: FCOPY problem
>
>
>>I am getting an abend:
>>
>> RESTORE FILE='ATT.SOURCE.FILE' OUTFILE=NEWLOC REORGANIZE
>> 8X12I FIXING OF I/O STORAGE FAILED
>> 8F10I DUMP DATA SET IS A ALL DUMP
>> ..
>>
>> 1S55I LAST RETURN CODE WAS 0016
>>
>> Because we do fcopy dump all. Can we not just restore one of the files?
>>
>>
>> -----Original Message-----
>> From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf
Of
>> industrynews@winwholesale.com
>> Sent: Thursday, July 10, 2008 3:39 PM
>> To: VSE Discussion List
>> Subject: Re: FCOPY problem
>>
>> owner-vse-l@Lehigh.EDU wrote on 07/10/2008 04:24:55 PM:
>>> I would like to FCOPY a flat file called ATT.SOURCE.FILE that is on
>>> HUT91F starting in track 1 for 3400 tracks but I would like to
>>> restore it to HUTVS1 starting in track 25200. How would I set this up
>>
>> Something like this aught to work.
>>
>> // JOB jobname
>> // TLBL UIN,'HUT91F.BACKUP'
>> // ASSGN SYS004,181
>> // ASSGN SYS004,182,ALT
>> // DLBL NEWLOC,'ATT.SOURCE.FILE'
>> // EXTENT SYS020,HUTVS1,1,0,25200,3400
>> // ASSGN SYS020,DISK,TEMP,VOL=HUTVS1,SHR
>> // EXEC PGM=FCOPY
>> RESTORE FILE='ATT.SOURCE.FILE' OUTFILE=NEWLOC REORGANIZE
>> /*
>> /&
>>
>> Sincerely, Dave Clark
>> WinWholesale Group Services
>> 3110 Kettering Boulevard
>> Dayton, Ohio 45439 USA
>> (937) 294-5331
This archive was generated by hypermail 2b25 : Sat Aug 30 2008 - 00:05:14 EDT