Subject: RE: Using Virtual Tape with Shared Power Queues
From: Max Singley (Max.Singley@alexlee.com)
Date: Wed Nov 11 2009 - 13:29:49 EST
I think the best solution would be an upsi switch or parm that would allow the tape server to remain up instead of starting it and stopping it all the time, especially if you use VTAPES regularly. just my two cents, Max E. Singley Technical Services Project Leader Alex Lee, Inc. Email: max.singley@alexlee.com <mailto:max.singley@alexlee.com> Tel: 828-725-4894 ________________________________ From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of Steve Mondy Sent: Wednesday, November 11, 2009 1:19 PM To: VSE Discussion List Subject: RE: Using Virtual Tape with Shared Power Queues Hi Louie, Have you checked with Dynam support to see if they could add the JNM= to their code? Or maybe add code to pick up the SYSID of the request for VTAPE and add that to their R RDR,TAPESRVR,SYSID=x command. Steve Steve H. Mondy Mainframe Technical Support Manager Open Solutions Inc. 3900 Essex Lane, Suite 400 Houston, TX 77027-5100 Office 713-965-8457 Cell 281-409-2870 Fax 713-965-8405 Email steve.mondy@opensolutions.com <mailto:steve.mondy@opensolutions.com> www.bank.opensolutions.com <http://www.bank.opensolutions.com/> www.opensolutions.com <http://www.opensolutions.com> From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of Louis Callari Sent: Wednesday, November 11, 2009 9:52 AM To: VSE Discussion List Subject: Re: Using Virtual Tape with Shared Power Queues Hi Bob and Kevin, I am on zVSE 4.2 but I am using Dynamt which generates the VTAPE statement under the covers, but it is good to know about the JNM parameter. I though about scanning for the R RDR stmt, but I just haven't done it yet, does anyone have any idea what phase it might be in. Louie Callari ________________________________ From: "Rbotsis@aol.com" <Rbotsis@aol.com> To: VSE Discussion List <vse-l@Lehigh.EDU> Sent: Wed, November 11, 2009 12:13:58 AM Subject: Re: Using Virtual Tape with Shared Power Queues And if your not on 4.2 and have a library scan program find the phase that has the current name in it and ZAP it to what you want. If you're on zVSE 4.2 there is a parameter on the VTAPE command to influence the name of the tape server // VTAPE START,CUU=780,LOC=VSAM,FILE='BACKUP1',SCRATCH,JNM=TAPESRVA ________________________________ NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited.. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
This archive was generated by hypermail 2b25 : Sun Nov 22 2009 - 16:20:07 EST