Re: Using Virtual Tape with Shared Power Queues

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: Re: Using Virtual Tape with Shared Power Queues
From: Louis Callari (louis.callari@yahoo.com)
Date: Wed Nov 11 2009 - 12:29:29 EST 

Thanks Bob and Gustavo,

I did find PRELEASE RDR,TAPESRVR at location 21CB in phase $IJBVTAP
I'll start there and see what happens.

Louie Callari




________________________________
From: "rbotsis@aol.com" <rbotsis@aol.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wed, November 11, 2009 11:29:46 AM
Subject: Re: Using Virtual Tape with Shared Power Queues

Forgot to mention. There were 2 hits for $IJBVTAP.


-----Original Message-----
From: Louis Callari <louis.callari@yahoo.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wed, Nov 11, 2009 10:52 am
Subject: Re: Using Virtual Tape with Shared Power Queues




Hi Bob and Kevin,
 
I am on zVSE 4.2 but I am using Dynamt which generates the VTAPE statement under the covers, but it is good to know about the JNM parameter.
 
I though about scanning for the R RDR stmt, but I just haven't done it yet, does anyone have any idea what phase it might be in.
 
Louie Callari



------------------------------------------------------------
From: "Rbotsis@aol.com" <Rbotsis@aol.com>
To: VSE Discussion List <vse-l@Lehigh.EDU>
Sent: Wed, November 11, 2009 12:13:58 AM
Subject: Re: Using Virtual Tape with Shared Power Queues



And if your not on 4.2 and have a library scan program find the phase that has the current name in it and ZAP it to what you want.

If you're on zVSE 4.2 there is a parameter on the VTAPE command to influence the name of the tape server
 
// VTAPE START,CUU=780,LOC=VSAM,FILE='BACKUP1',SCRATCH,JNM=TAPESRVA

New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Sat Nov 21 2009 - 13:20:07 EST