RE: After FSU to z/VSE 4.2.1

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: RE: After FSU to z/VSE 4.2.1
From: John P. Baker (jbaker314@comporium.net)
Date: Sun Nov 08 2009 - 18:38:55 EST 

Dave,

 

There are a couple of possibilities.

 

If you re-release CICSDATA, does it startup?  If so, it suggests that the
system was too busy or had too little storage.

 

Issue a GETVIS FB to ensure that there is plenty of GETVIS for the BSM.

 

Take a look at system GETVIS as well.  I am not certain where BSM allocates
its control blocks.

 

If you are releasing a lot a jobs during system initialization, you may wish
to use some IESWAIT invocations to slow things down a little.

 

John P. Baker

 

From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of
industrynews@winwholesale.com
Sent: Sunday, November 08, 2009 6:15 PM
To: VSE Discussion List
Subject: RE: After FSU to z/VSE 4.2.1

 

owner-vse-l@Lehigh.EDU wrote on 11/08/2009 06:10:09 PM: 
> Please post the FB console messages as well. 

        The only messages in FB are during IPL ASI processing: 

BG 0000 // JOB    BGINIT   PARTITION INITIALIZATION
15:59:10 
        DATE 11/08/2009, CLOCK 15/59/10
15:59:10 
BG 0000 1I93I RECORDER FILE IS  34% FULL
15:59:10 
BG 0000 IESI0221I PARTITIONS F2 WILL BE INITIALIZED IN RECOV START MODE.

BG 0000 IESI0222I REMAINING PARTITIONS WILL BE INITIALIZED IN WARM START
MODE. 
 IF YOU WANT TO INTERRUPT THEN ENTER MSG BG.
15:59:10 
BG 0000 L168I  PHASE IESCVSVA RELOADED INTO SVA-31 - PREVIOUS LOC. SVA-31

BG 0000    EXPLAIN ON
15:59:17 
EXPLAIN ON
15:59:17 
BG 0000 ALLOC BG=64M
15:59:17 
BG 0000 ALLOC F1=16M
15:59:17 
BG 0000 ALLOC F2=16M
15:59:17 
BG 0000 ALLOC F3=8M
15:59:17 
BG 0000 ALLOC F4=8M
15:59:17 
BG 0000 ALLOC F5=8M
15:59:17 
BG 0000 ALLOC F6=8M
15:59:17 
BG 0000 ALLOC F7=10M
15:59:17 
BG 0000 ALLOC F8=8M
15:59:17 
BG 0000 ALLOC F9=8M
15:59:17 
BG 0000 ALLOC FA=8M
15:59:17 
BG 0000 ALLOC FB=3M
15:59:17 
BG 0000 SIZE BG=1M,F1=1280K,F2=512K,F3=512K,F4=512K,F5=512K
15:59:17 
BG 0000 SIZE F6=512K,F7=512K,F8=512K,F9=512K,FA=512K,FB=512K
15:59:17 
AR 0015 1I25I EXPLAIN SUPPORT NOW ACTIVE
15:59:17 
BG 0000 *  EXEC   PROC=IESWORK       DEFINE WORK FILES ON VIRTUAL DISK
15:59:17 
FB 0011 // JOB    SECSERV   BASIC SECURITY MANAGER STARTUP
15:59:18 
        DATE 11/08/2009, CLOCK 15/59/18
15:59:18 
FB 0079 1J022I CPU CRYPTOGRAPHIC ASSIST FEATURE AVAILABLE.
15:59:18 
FB 0079 1J017I CRYPTO HARDWARE NOT INSTALLED OR NOT DEFINED.
15:59:18 
BG 0000 BST001I BASIC SECURITY MANAGER INITIALIZED
15:59:18 
BG 0000    STOP
15:59:19 
F1 0001 // JOB    VSEPOWER   START UP VSE/POWER PARTITION
15:59:19 
        DATE 11/08/2009, CLOCK 15/59/19
15:59:19 
F1 0001 1RB4I  PLOAD NETWORK DEFINITION TABLE WINPNETP LOADED
15:59:22 
F1 0001 1Q20I  AUTOSTART IN PROGRESS
15:59:22 

Sincerely,

Dave Clark

WinWholesale Group Services
3110 Kettering Boulevard
Dayton, Ohio  45439  USA
(937) 294-5331


This email message and any attachments is for use only by the named
addressee(s) and may contain confidential, privileged and/or proprietary
information. If you have received this message in error, please immediately
notify the sender and delete and destroy the message and all copies. All
unauthorized direct or indirect use or disclosure of this message is
strictly prohibited. No right to confidentiality or privilege is waived or
lost by any error in transmission.

New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Sun Nov 22 2009 - 02:20:06 EST