Subject: RE: Dynamic vs Static Partitions
From: Kovac, Jim (jkovac@uhc.com)
Date: Fri Nov 06 2009 - 18:39:18 EST
I would look at where 'card in' is assigned (assuming outfile is not card in). For years I had programmers argue with me about not being able to run IDCAMS in dynamics. It all came down to default assignment for sys004 and sys005 but couldn't get them to brake the habit. Someone must have been burned big-time at a former employer. Jim Kovac UnitedHealthcare Technology Solutions jkovac@uhc.com <snip> But it fails when running in a dynamic partition with a rather bogus error message: I/O SECTION. PERFORM (EXTRACT) TO (OUTFILE) DEVADDR (SYS012) ****** CARD IN ERROR ****** TO (OUTFILE) DEVADDR (SYS012) SYS012 is assigned to a tape drive. (runs fine in BG and F9, gives error message when in dynamic). <snip> This e-mail, including attachments, may include confidential and/or proprietary information, and may be used only by the person or entity to which it is addressed. If the reader of this e-mail is not the intended recipient or his or her authorized agent, the reader is hereby notified that any dissemination, distribution or copying of this e-mail is prohibited. If you have received this e-mail in error, please notify the sender by replying to this message and delete this e-mail immediately.
This archive was generated by hypermail 2b25 : Tue Nov 24 2009 - 16:05:06 EST