Re: 8228 token ring connector

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: Re: 8228 token ring connector
From: Tony Thigpen (tony@vse2pdf.com)
Date: Wed Nov 04 2009 - 14:54:26 EST


The tool was used to reset individual MAU ports that were messed up. If 
that was the problem, just moving the cable to a different port would 
normally clear it up.

Tony Thigpen


-----Original Message -----
  From: Dave Lewis
  Sent: 11/04/2009 02:41 PM
> As a recall there was also a "tool" that had to be plugged in to 
> initialize things. It might have had to be plugged into each port in 
> sucession or something like that.
> 
> Dave Lewis
> -----Original Message-----
> From: Edward M Martin
> Sent: Nov 4, 2009 1:19 PM
> To: VSE Discussion List
> Subject: RE: 8228 token ring connector
> 
>     To Jim and Tony,
> 
>      
> 
>     Thanks I appreciate any information.
> 
>      
> 
>     Ed Martin
> 
>     Aultman Health Foundation
> 
>     330-363-5050
> 
>     ext 35050
> 
>     *From:* owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] *On
>     Behalf Of *Jim Phoenix
>     *Sent:* Wednesday, November 04, 2009 1:17 PM
>     *To:* VSE Discussion List
>     *Subject:* Re: 8228 token ring connector
> 
>      
> 
>     Edward,
> 
>     The RO and RI ports are only needed to connect multiple 8228s or
>     other hub together.  Do not connect any other device to these ports.
> 
>     It does not matter which port the 3174 is connected to.
> 
>     With newer hubs/switches, we have had to re-enable the interface on
>     our OSA, when the cable got unplugged.  I don't remember if we ever
>     had to do that with the 3174, when we had one.  We no longer have
>     the T/R OSA, so this is all as I recall.
> 
>     Edward M Martin wrote:
> 
>     Hello Everyone,
> 
>     NO ONE LAUGH (to much anyway)!
> 
>     We have a Token-Ring 8228 Hub.  Since this is the only 8228 do we
>     need anything in the RO and RI ports, like terminators or can the
>     stay open?
> 
>     Secondly the 3174 connects to the 8228, that connector can be in any
>     port correct (other than the RO and RI ports)?
> 
>     And yes the Token Ring is down.
> 
>     Seems some network person needed the rack area, and requested that
>     the 8228 be removed from the rack. 
> 
>     Has not work since.
> 
>     About 2 hours ago.  I just got notified.  
> 
>     Ed Martin
> 
>     Aultman Health Foundation
> 
>     330-363-5050
> 
>     ext 35050
> 
>      
> 
>     -- 
>     | Jim Phoenix                      | Voice:   (310) 338-0400 x316   |
>     | Senior Software Developer        | Fax:     (310) 338-0801        |
>     | Phoenix Software International   | Alt fax: (310) 337-2685        |
>     | 5200 W. Century Blvd., Suite 800 | jimphoenix@phoenixsoftware.com
>     <mailto:jimphoenix@phoenixsoftware.com> |
>     | Los Angeles, CA 90045            | http://www.phoenixsoftware.com |
> 
>     Opinions expressed by this individual are not necessarily those of
>     the Company.
> 


New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Sat Nov 21 2009 - 23:35:06 EST