Subject: RE: 8228 token ring connector
From: Edward M Martin (EMartin@aultman.com)
Date: Wed Nov 04 2009 - 13:19:25 EST
To Jim and Tony, Thanks I appreciate any information. Ed Martin Aultman Health Foundation 330-363-5050 ext 35050 From: owner-vse-l@Lehigh.EDU [mailto:owner-vse-l@Lehigh.EDU] On Behalf Of Jim Phoenix Sent: Wednesday, November 04, 2009 1:17 PM To: VSE Discussion List Subject: Re: 8228 token ring connector Edward, The RO and RI ports are only needed to connect multiple 8228s or other hub together. Do not connect any other device to these ports. It does not matter which port the 3174 is connected to. With newer hubs/switches, we have had to re-enable the interface on our OSA, when the cable got unplugged. I don't remember if we ever had to do that with the 3174, when we had one. We no longer have the T/R OSA, so this is all as I recall. Edward M Martin wrote: Hello Everyone, NO ONE LAUGH (to much anyway)! We have a Token-Ring 8228 Hub. Since this is the only 8228 do we need anything in the RO and RI ports, like terminators or can the stay open? Secondly the 3174 connects to the 8228, that connector can be in any port correct (other than the RO and RI ports)? And yes the Token Ring is down. Seems some network person needed the rack area, and requested that the 8228 be removed from the rack. Has not work since. About 2 hours ago. I just got notified. Ed Martin Aultman Health Foundation 330-363-5050 ext 35050 -- | Jim Phoenix | Voice: (310) 338-0400 x316 | | Senior Software Developer | Fax: (310) 338-0801 | | Phoenix Software International | Alt fax: (310) 337-2685 | | 5200 W. Century Blvd., Suite 800 | jimphoenix@phoenixsoftware.com | | Los Angeles, CA 90045 | http://www.phoenixsoftware.com | Opinions expressed by this individual are not necessarily those of the Company.
This archive was generated by hypermail 2b25 : Sun Nov 22 2009 - 01:05:05 EST