Re: 2n2222 as replacement for MPS5179

New Message Reply Date view Thread view Subject view Author view Other groups

Subject: Re: 2n2222 as replacement for MPS5179
From: Rod N0RC (rc7039-hr@yahoo.com)
Date: Sat Feb 28 2004 - 09:02:55 EST 

Mike et. al.,

Yes I'm sure, Please re-read the first sentence of my post:

"I'm fixing up the Noise Bridge in an INDEX Labs QRP Companion.?
                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I believe you are discussing the radio itself. No further response are
necessary--I ordered some MPS5179s.

73, Rod N0RC


----- Original Message ----- 
From: "Michael C. Boatright" <ko4wx@mindspring.com>
To: <qrp-l@Lehigh.EDU>
Cc: <rc7039-hr@yahoo.com>
Sent: Friday, February 27, 2004 7:24 PM
Subject: Re: 2n2222 as replacement for MPS5179


Rod,

Rod, are you sure it's Q2 and not Q3?  I'm assuming you're talking about
the QRP-RF PCB ASSY (RF board).  On that board, Q2 is a 2N5109 and Q3 is
a
2N5179.  If memory serves, I popped the 2N5109 once...  You really don't
want to replace the 2N5109 with a 2N2222 as Q2 runs hot as it is...

New Message Reply Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b25 : Sun Feb 29 2004 - 23:50:08 EST